LINING MATERIALS
Lining materials
Our company’s aim is to save energy and reduce emissions. In order to solve the troubles of foundry customers caused by slag pouring, our company develops and produces one specific chemical sticking slag protecting molten iron(steel) lining material, and obtained National Patent and Technical Certificate. It effectively solves slag sticking problem of the the traditional material in the casting process in foundry workshop, and improve the anti-erosion ability, increase service life,Reduce cost and improve production efficiency, deeply praised by customers.
The characteristics of this product are as follows: no slag sticking, no chemical reaction with molten iron, strong corrosion resistance, has the corresponding heat preservation effect, easy to repair, good thermal shock resistance, long service life.
Using tips: first, according to inside diameter of ladle, prepare the internal core, after ramming the bottom of ladle, put the core into it, keep the core in the middle of the ladle, and ram tightly. Heat the ladle, take out the core after the lining solidification and roast. High temperature roast is necessary for first time use(1600℃).
Description |
model |
Technical index |
upper limit of temperature(℃) |
Patent number:201610758370.0 using scope |
||||||
Al2O3 |
SiO2 |
SiC |
Cr2O3 |
ZrO2 |
MgO |
density |
||||
Plastic ramming material |
RX-A |
60 |
30 |
2 |
3.6 |
6 |
|
2.7 |
1650 |
Ductile iron lining |
Plastic ramming material |
RX-B |
47 |
45 |
2 |
1.3 |
3.2 |
|
2.47 |
1600 |
General iron lining |
Plastic material |
RX-AZ |
56 |
31 |
2.4 |
2 |
7 |
|
2.61 |
1680 |
Plastic ramming material, both iron ladle and steel ladle can use |
Pouring material |
RX-AB |
80 |
56 |
|
5 |
6 |
3 |
2.65 |
1700 |
plain carbon steel lining material for molten iron |
Groove material |
RX-JC |
46 |
42 |
3 |
3 |
5 |
|
2.73 |
1600 |
Iron Ladle mouth |
Insulating daub |
RX-JA |
82 |
13 |
|
|
|
3 |
2.87 |
1620 |
Medium frequency electric furnace Coil protective layer |
Repair material |
RX-XB |
71 |
18 |
|
4 |
2 |
|
2.91 |
1650 |
Ladle and furnace lining repairing |